Product Details

	Button(WS-*1) Stainless steel button, stand destroying, watertight, exceed 200000 use times. Waterproof degree IP65 Marked “*” means B/C/D/E		WS-C Infrared sensor and stainless steel button double startup modes
	Ring Color Light Button (WS-*2) Stainless steel button, stand destroying, watertight, exceed 200000 use times. Waterproof degree IP65 Marked “*” means B/C/D/E		Infrared Sensor (Touch Free Activate)
	Point Color Light Button (WS-*3) Stainless steel button, stand destroying, watertight, exceed 200000 use times. Waterproof degree IP65 Marked “*” means B/C/D/E		Heating function (Only for WS-D and WS-E) When turning on the heating switch , the temperature of the seat will automatically keep between 38°C-45°C, warm and comfortable.
	Microcomputer & Indication Light 1.Overload warning signal: LED light will stay on for 2 seconds 2. If no loading or counter wheel fault or the film roller is not installed in place signal:LED light is on all the time 3.The LED will flash when battery is in low voltage 4.Restarting interval(5 seconds) to avoid waste		Microcomputer & indication light（Only for WS-D and WS-E） If there is a malfunction with heating device, the LED light will flash in green, and the heating function will stop automatically. If there is a malfunction with temperature controller, the LED light will turn green, but the heating temperature will not exceed 60℃ to ensure safety .
	Charging Ways ( Only for WS-B/WS-C) 1. the power supply is available around the toilet: --A open the white cover located on the back of pedestal and have it charged. 2. the power supply is not available around the toilet: --A. push the lever on the bottom of left side, then, take out the WING seat and have it charged where power supply is available --B. open the cover located on the back of pedestal, pull the red ribbon and take out the battery, then have the battery recharged where power supply is available		Power supply A: Rechargeable Battery (Only for WS-B and WS-C) B: Adapter: input voltage 100V-240V, Output voltage: DC 6V (Only for WS-B and WS-C)  C: Adapter: Input voltage 100V-240V, Output voltage: DC24V (Only for WS-D and WS-E,)
	Slow close cover Toilet cover with damper can close slowly. At normal environment, the damper can be used for more than 50, 000 times.
	Replacement Warning A red line will appear when the seat cover remains 2-3 m,it reminds you to replace the seat cover.		Seat Somatological fit,fully comfortable,67mm in width.